Underfloor systems

Mounting aid, round service outlet - GESR9-2

Laying the floor covering for duct systems

Lay the floor covering up to the opening of the blanking lid.

Opening of the hinged lid for GESR9-2U

Actuate both lid sliders. The fitters push the hinged lid upwards. Lift the lid using the cord outlet.

Removal of the hinged lid

Push the hinge together and lift it, together with the lid, upwards out of the holder.

Insertion of the hinged lid

Push the hinge together and insert in the holder in the frame.

Installation of the hinged cover for GESR round service outlet

Slacken the 4 lid screws and the inserted 7 mm spacer frame and replace it with the 2 mm spacer bars. Screw the sheet steel lid on again.

Adjust of the floor covering recess to
10 mm

Slacken the 4 lid screws and the inserted 7 mm spacer frame and replace it with the 2 mm spacer bars. Screw the sheet steel lid on again.

Adjust of the floor covering recess to
12 mm

Slacken the 4 lid screws and remove the inserted 7 mm spacer frame. Screw the sheet steel lid on again.

Universal fastening, duct mounting

On screwing in, the retaining profile automatically turns outward. It grips under the mounting lid.

Universal fastening, raised floor mounting

The clamping range of the retaining profile is suitable for raised floor plates of a thickness of up to 45 mm.

Universal fastening, raised floor mounting, s ≥ 47 mm

Slacken the retaining profile from the screw and turn it round. Turn the screw back into the retaining profile. In this position, the clamping range is 37 to 75 mm.

Universal fastening, cavity floor mounting

On screwing in, the retaining profile automatically turns outward, locking the service outlet.

Device mounting in GB mounting box

The device is mounted without screws in cover plates and GB mounting boxes.
Note:
Lock Modul 45® devices into the cover plate for connecting the cable.

Device mounting in MT module support

Devices are mounted in the module support MT3/45 and MT4/45 outside the service outlet. After cable connection, insert the module support into the service outlet from above.

Socket mounting in MT module support

Safety:
When mounting sockets in module supports, always use a protective housing.